Foundations path

Digital Electronics

The building blocks every chip starts from: number systems and binary arithmetic, logic gates and Boolean algebra, Karnaugh maps, combinational and sequential circuits, finite state machines, fast adders, multipliers, floating point, and error correction.

11
lessons
Beginner
level
Free
every lesson
Start with lesson 1 →

Digital Electronics

  1. 1Number Systems & Binary ArithmeticBinary, octal, decimal and hexadecimal, how to convert between them, and how a circuit adds and subtracts using two's complement.
  2. 2Logic Gates & Boolean AlgebraThe seven basic gates with their truth tables and symbols, why NAND and NOR are universal, and the Boolean algebra rules that let you simplify an expression by hand.
  3. 3Karnaugh Maps (K-Maps)Simplifying a Boolean function visually instead of algebraically, why the map is laid out in Gray-code order, grouping rules, don't-care conditions, and a full worked example.
  4. 4Combinational Logic CircuitsCircuits whose output depends only on the current inputs: half and full adders, ripple-carry addition, multiplexers, decoders, encoders and magnitude comparators.
  5. 5Sequential Logic CircuitsCircuits that remember: SR and D latches, the master-slave D flip-flop, setup and hold time, and why a flip-flop is built from two latches instead of one.
  6. 6Finite State Machines (FSM)Moore and Mealy machines, state diagrams and state tables, and a fully worked sequence-detector example in both styles.
  7. 7Digital Electronics Interview Q&AShort, direct answers to the questions interviewers actually ask about number systems, gates, K-maps, adders and sequential logic, gathered from the earlier lessons in this path.
  8. 8Fast Adders: Carry LookaheadWhy ripple-carry addition is too slow for a wide adder, how generate and propagate signals compute every carry directly, and a fully worked 4-bit example.
  9. 9Multipliers and Barrel ShiftersArray multiplication built from adders, and barrel shifters that shift or rotate by any amount in one pass using a chain of 2-to-1 muxes.
  10. 10Fixed-Point and Floating-Point RepresentationRepresenting fractions in binary: fixed-point Q formats, IEEE 754 single-precision floating point, a fully worked encoding example, and the standard's special values.
  11. 11Error Detection and CorrectionParity bits, why they can only detect and not correct, and a fully worked Hamming(7,4) example that both detects and corrects a single-bit error.